OMNICRAFT™
A TRUSTED RELATIONSHIP JUST GOT BETTER
Omnicraft is the newest member of the Ford family of parts, offering affordable, reliable parts designed for non-Ford repairs. With over a century of parts heritage to build upon, Omnicraft is a quality choice for your business.
It's the first new parts brand that Ford Motor Company has launched in 50 years, but its heritage runs deep. And it starts with Motorcraft® -- long recognized as the brand to use for high-quality, vehicle specific repair solutions for Ford and Lincoln vehicles. With the addition of Omnicraft, customers now have access to high-quality and competitively priced parts for all other major brands. A trusted relationship just got better.
OMNICRAFT'S PRODUCT LINEUP
Omnicraft parts are backed by Ford Motor Company and compete with premium aftermarket parts offerings. Omnicraft offers the most commonly used maintenance and light repair parts including oil filters, brake pads and rotors, coated calipers, loaded struts, radiators, wheel hub assemblies, cabin air and engine air filters as well as starters and alternators. Additional product lines are in development and will launch as they become available.
A WARRANTY SECOND TO NONE - AND BETTER THAN MOST
Just as with Motorcraft, we proudly stand behind our Omnicraft quality. That's why Omnicraft offers a warranty that is on par with, or better than, the best of the aftermarket in each category, with the added benefit of labor reimbursement for the first two years. Warranty coverage in the aftermarket varies by product category. To put us in the most competitive position possible, we elected to match those warranties on a product-by-product basis.
OIL FILTERS
Omnicraft Filters - Powered By Ford
- Omnicraft oil filters are competitively priced
- Oil filter coverage for 93% of the vehicles on the road (includes Motorcraft and Omnicraft offerings)
- High quality internal components ensure a long service life
Designed to Perform
- Cellulose media provides high filtering capacity and strength, and screens out abrasives to help prevent engine wear
- Up to 96% efficiency at 20 microns
- Nitrile rubber anti-drainback valves resist high heat and keep oil in the filter to help prevent dry starts†
- Large pressure-relief valves help to maintain oil supply to the engine under extreme operating conditions†
- Bonded end-plates help keep consistent pleat spacing to enable efficient oil flow
- Perforated steel center tube provides internal supportneeded under pressure†
- Steel cases are "ironed" for a precise fit and fluted for easy removal†
†Not applicable on all part numbers.
Efficient Filtering
- Cellulose media is formulated for high temperature stability efficiency
- Large filter media area provides optimum capacity
- Steel Case
- Steel cases are "ironed" for a precise fit and fluted for easy removal
- Tough Outside†
- End cap seam is crimped and rolled to ensure a good seal
- Tough Inside†
- Robust steel center tubes help in withstanding pressure surges
- Bonded end-plates assist in keeping pleats evenly placed
AIR FILTERS
The Omnicraft Advantage
- Ready-to-install out of the box for easy installation
- Precision components for long-life
- Excellent performance under most operating conditions
- Backed by Ford Motor Company**
Omnicraft Air Filter Features
- Precision engineered to demanding standards to help ensure proper filtration
- Multi-fiber, high density media protects against dust, dirt and soot
- Traps up to 99% of damaging debris and helps prevent engine wear†
- Resistant to temperature extremes including high heat and humidity
- Designed to help enhance capacity and efficiency
- Pleat lock glue bead feature allows pleats to "lock" into place for consistent airflow and less restriction††
- Embossed pleats and pleat stabilization beads help filter trap more dirt and last longer††
†Based on ISO 5011 on QFA-32
††Not applicable on all models; specific part numbers only
Excellent Filtration
- High density media helps protect engine against dust and dirt
- Traps up to 99% of damaging debris†
- Built to strict engineering standards
Excellent Performance
- Excellent performance under most operating conditions
- Designed to enhance capacity and efficiency
- Engineered for reliable operation
BRAKE PADS AND COATED ROTORS
Omnicraft Brakes
- Available for most all make vehicles
- Delivers quality fi t and competitive pricing
- Offers industry-comparable warranty
- Convenient one stop availability from Ford
- Tested to provide performance and long-life reliability
Omnicraft Brake Pads
Omnicraft Rotors & Drums
- High carbon casting† for:
- Enhanced heat dissipation and extended brake life
- High resistance to thermal cracking and fade
- Low noise propensity and resistance to brake judder
- Rotor Coating for:
- Helps prevent corrosion and increases rust resistance
- Clean appearance for open wheels
+Hub rotors made from industry standard G3000 cast iron.
- Slots and Chamfers to reduce noise
- Friction material matched to vehicle family and usage profile
- Long Life -- Designed for long, quiet, trouble-free service life
HIGH CARBON CASTING
- Corrosion resistance
- Low fade performance
SPARK PLUGS
The Omnicraft Advantage
- Competitively priced
- Available for most non-Ford/Lincoln vehicles
- Offer industry-comparable warranty**
- Convenient one-stop availability from Ford
- Tested to provide performance and long-life reliability
Omnicraft Spark Plugs Features
- Omnicraft iridium plugs help provide efficiency and a long service life
- Application-specific designs
- Iridium-enhanced 0.6 fine-wire design for optimal durability† and performance
- Patented, platinum side-wire technology for maximum efficiency in most ignitions
- V-trimmed ground electrode for enhanced ignitability††
- Heat Range determined by Industry Standard (SAE-J549) test specification
- Multi-rib insulator helps protect against misfire
- Internal resistor minimizes electrical interference
- Copper core improves resistance to fouling with increased rate of tip heat induction
- Nickel-plated shell for corrosion resistance
†Compared to 0.8mm fine-wire, multi-electrode design and standard plugs
††Compared to average of other premium brands
Excellent Value
- Excellent performance under various operating conditions
- Long life with iridium-enhanced 0.6 fine-wire center electrode
- Enhanced ignitability with V-trimmed ground electrode
- Heat Range determined by Industry Standard (SAE-J549) test specification
THERMOSTATS
The Omnicraft Advantage
- Available for most non-Ford/Lincoln vehicles
- Precision manufactured components for a long life
- Reliable durability and excellent value
- Excellent performance under most operating conditions
- Backed by Limited Lifetime Warranty with unlimited distance*
- Approved and backed by Ford Motor Company
Omnicraft Thermostat Features
- Designed to help withstand the demands of automotive cooling systems by providing consistent and reliable responses
- Designed and manufactured to match manufacturer's material and processes to help ensure proper fit, form and function -- allowing easy direct-fit replacement
- Precise wax composition allows quick responsiveness to coolant temperature changes
- High grade stainless steel and copper construction help maintain accurate engine operating temperatures
- Tested and calibrated to meet highest quality and performance standards
Excellent Value
- Designed and manufactured to meet rigorous industry standards to help ensure proper fit, form and function
- Wax composition designed for quick temperature change responsiveness
- Easy direct fit replacement
SERPENTINE BELTS
The Omnicraft Advantage
- Available for most non-Ford/Lincoln vehicles
- The right belt for the right application -- designed to fit right and help ensure optimum performance
- Excellent performance under the typical range of operating conditions
- Approved and backed by Ford Motor Company
- Backed by 2 year warranty with unlimited distance**
Omnicraft Belt Features
- Wide application coverage helps ensure availability for most major brands
- Designed to precise, application-specific tolerances to help eliminate slipping and squealing
- State-of-the-art manufacturing processes help provide reliable and consistent quality
- Advanced materials designed to minimize noise, vibration and premature failure
- Latest material advances in synthetic rubber technology help ensure smooth operation and a long service life
- Resists deterioration caused by grease, oil, dirt and high temperature
- All belt designs thoroughly tested using rigorous simulation programs
- Innovative advancements in belt design help maintain reliability and performance in high mileage applications
Excellent Value
- Tested using rigorous simulation programs
- Tight, application-specific tolerances help eliminate slipping and squealing
- Advanced materials help minimize NVH
- Latest material advances in synthetic rubber technology for smooth operation
Useful Part Number Information
To help ensure you get the right replacement belt, Omnicraft includes useful information encoded in the part number of each belt.
- For example, QJK6-342A is an Omnicraft ribbed belt with six ribs and an outside circumference of 34.25"
- The Q designates it as Omnicraft and the second letter -- J -- designates the belt line
- The third letter is a variable that designates either K for a Rib Belt or a code for the top width of the V-Belt
- The last prefix number indicates the number of ribs on a K-Ribbed Belt
- The first three or four numbers in the base designate the outside circumference of the belt in inches; and the last number designates the remaining fractions of an inch expressed in eighths of an inch
